Model
28-1 is a single position "heated tube" design that does not require a glass hydrometer cylinder to put the test sample in.
The metal tube
is filled to the
top with the
sample where it is brought to the desired test temperature. The hydrometer is placed into the tube to determine the API or specific gravity.
An overflow
catch collar
collects the
excess sample to
waste. After completion of the test a drain valve is opened and the sample is discarded to a waste container or sink.
Models
28-2 and 28-6
are similar to
Model 28-1 but
with 2 and 6 test
positions,
respectively.
Model
177-12 accepts twelve 2 inches diameter by 16 inch long hydrometer cylinders for measurement of API or specific gravity at temperatures from ambient to +100°C. It has an agitated liquid bath and adjustable overflow pipe to maintain the correct bath level when the hydrometer cylinders are immersed. The 17 inch deep stainless steel, insulated bath is electronically heated and its temperature control is provided by digital indicating temperature controller with resolution to 0.1°C providing temperature stability or better than ±0.1°C.
The cabinet dimensions are 31"x 16"x 21". Shipping weight is 200 lbs/27
cu.ft.
Model
177-6
is similar to
Model 177-12 but a
smaller bath to
accept 6 test
tubes.
Model 177-4D is
a 12 inch diameter
by 18 inch
borosilicate glass
jar with support
to hold vertically
4 test cylinders.
Temperature
control is
provided by a
digital display
adjustable
controller. The
agitated bath is
also protected by
high temperature
limit switch as
well as a low bath
liquid level
switch.
|