Test Method: D1742
Oil Separation from Grease
• Meets The Requirements of ASTM D1742 and
....FTM 791-322
• Refrigerated and Heated Constant Temperature Cabinet
• Digital Temperature Control at 25ºC ± 0.5ºC
• Available for 4 or 6 Pressure Bleeding Test Cells
• Air Pressure Control

Models 375-4 and 375-6 have 4 and 6 positions, respectively, and meet the requirements of ASTM D1742 and FTM 791-322 Test Methods for Oil Separability from Grease During Storage.

The cabinet has an integral refrigeration compressor providing temperature control at 25°C ±0.5°C regardless of ambient temperature. Control is provided by a digital indicating controller with 0.1°C resolution showing set point and actual temperature. Forced air circulation provides uniform temperature within the cabinet.

Pressure to the pressure bleed test cells is regulated at 0.25 psi (1.72 kPa). The regulating system includes an air inlet pressure regulator with gauge, control valve for each cell, and a built in pressure relief system protecting against pressure surges. A shutoff valve is provided for each test cell allowing removal of one test cell without disturbing the other cells still under test.

Model 375-4 and 375-6 have 2 front opening doors and overall approximate dimension of 24 by 30 by 30 inches high.

Available Models
Model No.
Description
375-4
Temperature controlled cabinet with integral refrigeration & 4 pressure bleed test cells
375-6
Temperature controlled cabinet with integral refrigeration & 6 pressure bleed test cells
373-4
Temperature controlled cabinet 4 pressure bleed test cells, requires external chiller
373-6
Temperature controlled cabinet 6 pressure bleed test cells, requires external chiller
371-4
Pressure control assembly with 4 pressure bleed test cells, without temperature control
371-6
Pressure control assembly with 6 pressure bleed test cells, without temperature control

Replacement Accessories
Part No.
Description
OS-1
Pressure bleed cell with beaker - Type A
OS-1
20 mL Beaker

Specifications are subject to change without notice.
Specifications subject to change without notice. Lawler Manufacturing Corporation © 2011