|
Model 505-8 is an oil bath with 6 test positions accepting ASTM D2440 or IEC61125 test tubes and with 8 float in tube flowmeters and precision control valve
delivering oxygen at 1 ±0.1 L/hr. It operates at 110°C with ±0.2°C stability. Specify which test method with order.
The heavily insulated stainless steel bath is agitated by an electrical motor for temperature uniformity. An over temperature cut off circuit is provided in the event of primary controller failure and a float for protection against low oil level.
Models 505-4 and 505-12 are similar to Model 505-8 but with 4 and 12 test positions, respectively
Model 61-8 is an aluminum block bath with 8 test positions accepting ASTM D2440 or IEC61125 test tubes and with 8 float in tube flowmeters and precision control valve delivering oxygen at 1 ±0.1 L/hr. It operates at 110°C with ±0.2°C stability. Specify which test method with order.
Models 61-4 and 61-12 are similar to Model 506-6 but with 4 and 12 test positions, respectively.
|
505-4
|
Oil bath with 4 test positions with flowmeters
|
|
505-8
|
Oil bath with 8 test positions with flowmeters
|
|
505-12
|
Oil bath with 12 test positions with flowmeters
|
|
61-4
|
Aluminum block with 4 test positions with flowmeters
|
|
61-8
|
Aluminum block with 8 test positions with flowmeters
|
|
61-12
|
Aluminum block with 8 test positions with flowmeters
|
|
|
FM-14
|
Oxygen Drying Tower with Dririte
|
|
OX-42
|
Test tube and oxygen delivery tube
|
|
OX-43
|
Filtering crucibles
|
|
OX-82
|
Copper coils, two 12 inch coils in a jar ready for use
|
|
SCC-22
|
220 grit silicon carbide abrasive cloth, 50 sheets
|
|
DAX
|
Paperless videographic temperature/flow recorder with flash memory card
|
|
Specifications are subject to change without notice.
|
|
|
