The Automated Pour Point Analyzer fully conforms to method ASTM D97 even to the extent of lifting the test sample from the cold jacket and tilting the sample to test for its flow. Movement of the sample is detected by a non-contact sensor. If movement is not detected, the test tube is automatically returned to the cold bath and the bath is lowered to the next lower temperature to repeat the test. All operations are controlled via a touch panel, which displays sample, bath, and the pour point result temperatures.
Available in various combinations of test heads in a single unit for CFPP, Cloud, Pour, and Freeze Points. All positions are independent of each other.
Model DR4 series of chillers for cooling the automated analyzers uses the Lawler developed concept of direct refrigeration. The test cup (metal jacket) for cloud point, pour point, or CFPP is directly cooled by the refrigerant, thus replacing the middle step of first cooling the flammable alcohol and then pumping the cold alcohol to the test jacket. Offers the additional advantage of rapid cool down to test temperature within minutes versus hours with bulky floor model cryostat models. The automated analyzer is mounted on the same cabinet as the refrigeration system, thus saving valuable laboratory space. DR4 series coolers are available in 1 or 2 test positions with lowest temperature of either -34° or -70°C.
Model OL series are similar to DR4 but designed to work with an external alcohol chiller, either your own or supplied by Lawler. OL series units are available in 1, 2, 3, or 4 position units. Lawler offers two recirculating chiller models (MRCC-80 and MRCC-5) for use in conjunction with the OL analyzer.
Model MRCC-80is a high capacity cryostat able to cool up to three Model OL series analyzer positions.
Its lowest operating temperature is -70°C.
Model MRCC-5is a very high capacity cryostat able to cool up to six Model OL series analyzer positions. Its lowest operating temperature is -70°C. This model has a 5 year guarantee against compressor failure.
Integrated Automated Analyzer with Direct Refrigeration (Dry Bath) Unit.
1 Cloud Point automated test position
2 Cloud Point automated test positions
1 Cloud Point + 1 Pour Point automated test positions
1 Cloud Point + 1 CFPP automated test positions
1 Cloud Point + 1 Freeze Point automated test positions
1 Pour Point automated test position
2 Pour Point automated test positions
1 Pour Point + 1 CFPP automated test positions
1 Pour Point + 1 Freeze Point automated test positions
1 CFPP automated test position
2 CFPP automated test positions
1 CFPP + 1 Freeze Point automated test positions
1 Freeze Point automated test position
2 Freeze Point automated test positions
Automated Analyzer with External Chiller
Automated cloud point analyzer with touch panel control, 1 test position
Automated cloud point analyzer with touch panel control, 2 test positions
Automated analyzers with touch panel control, 1 CFPP & 1 cloud point
Automated analyzer with touch panel control, single test position
Automated analyzer with touch panel control, two test positions
Other combinations with Freeze Point and Pour Point are available
Suitable for up to 3 test positions
Suitable for up to six test positions - 5 Yr compressors guarantee
Test Jar for cloud, mirrored bottom
Test Jar for pour point
Test Jar for CFPP
Test tube for Freeze point
O-Ring (one per test jar), dozen (Freeze Point test tube does not require o-ring)
Brass filter assembly (as per ASTM D6371 Fig. 7 & 8). Includes CF-22
Filter disk/screen for CFPP (as per Section 18.104.22.168.c of D6371), dozen
Replacement “O” rings for filter screen (large), dozen for CFPP
Brass Filter Holder with CF-11A filter screen for CFPP
Aspiration pipette for CFPP
Replacement “O” rings for pipette (small), dozen for CFPP
Vacuum pump (as per Section 6.1.12) (115 volt) for CFPP
Vacuum pump (as per Section 6.1.12) (220 volt) for CFPP
Note: Vacuum pump required if suitable vacuum source unavailable. Supports up to 6 positions
Spare sample temperature probe. Suitable for CFPP, pour, and/or freeze point
Spare sample temperature probe. Suitable for cloud point (spring loaded)
Recommended spare accessories for automatic Cloud, per position
Includes: (6) DR-CP, (1) CP-2
Recommended spare accessories for automatic Pour, per position
Includes: (6) DR-PP, (1) CP-2
Recommended spare accessories for automatic CFPP, per position