Test Method: D97, D2500, D2386, D6371, EN-116 and IP-309
Fully Automated Analyzers

Available in various combinations of test heads in a single unit for CFPP, Cloud, Pour, and Freeze Points. All positions are independent of each other.

Model DR4 series of chillers for cooling the automated analyzers uses the Lawler developed concept of direct refrigeration. The test cup (metal jacket) for cloud point, pour point, or CFPP is directly cooled by the refrigerant, thus replacing the middle step of first cooling the flammable alcohol and then pumping the cold alcohol to the test jacket. Offers the additional advantage of rapid cool down to test temperature within minutes versus hours with bulky floor model cryostat models. The automated analyzer is mounted on the same cabinet as the refrigeration system, thus saving valuable laboratory space. DR4 series coolers are available in 1 or 2 test positions with lowest temperature of either -34° or -70°C. All operations are controlled via a touch panel, which displays sample, bath, and the result temperatures.

Model OL series are similar to DR4 but designed to work with an external alcohol chiller, either your own or supplied by Lawler. OL series units are available in 1, 2, 3, or 4 position units. Lawler offers two recirculating chiller models (MRCC-80 and MRCC-5) for use in conjunction with the OL analyzer.

Model MRCC-80 is a high capacity cryostat able to cool up to three Model OL series analyzer positions.
Its lowest operating temperature is -70°C.

Model MRCC-5 is a very high capacity cryostat able to cool up to six Model OL series analyzer positions.
Its lowest operating temperature is -70°C. This model has a 5 year guarantee against compressor failure.




Available Models
Integrated Automated Analyzer with Direct Refrigeration (Dry Bath) Unit.
Model No.
Test Positions
DR4-10
1 Cloud Point automated test position
DR4-11
2 Cloud Point automated test positions
DR4-12
1 Cloud Point + 1 Pour Point automated test positions
DR4-14
1 Cloud Point + 1 CFPP automated test positions
DR4-15
1 Cloud Point + 1 Freeze Point automated test positions
DR4-20
1 Pour Point automated test position
DR4-22
2 Pour Point automated test positions
DR4-24
1 Pour Point + 1 CFPP automated test positions
DR4-25
1 Pour Point + 1 Freeze Point automated test positions
DR4-40
1 CFPP automated test position
DR4-44
2 CFPP automated test positions
DR4-45
1 CFPP + 1 Freeze Point automated test positions
DR4-50
1 Freeze Point automated test position
DR4-55
2 Freeze Point automated test positions

Automated Analyzer with External Chiller
Model No.
Test Positions
OL-10-1
Automated cloud point analyzer with touch panel control, 1 test position
OL-10-2
Automated cloud point analyzer with touch panel control, 2 test positions
OL-14-2
Automated analyzers with touch panel control, 1 CFPP & 1 cloud point
OL-40-1
Automated analyzer with touch panel control, single test position
OL-40-2
Automated analyzer with touch panel control, two test positions
Other combinations with Freeze Point and Pour Point are available
External Chillers
MRCC-80
Suitable for up to 3 test positions
MRCC-5
Suitable for up to six test positions - 5 Yr compressors guarantee

Accessories
Model No.
Test Positions
DR-CP
Test Jar for cloud, mirrored bottom
DR-PP
Test Jar for pour point
DR-CF
Test Jar for CFPP
DR-FP
Test tube for Freeze point
CP-2
O-Ring (one per test jar), dozen (Freeze Point test tube does not require o-ring)
CF-11
Brass filter assembly (as per ASTM D6371 Fig. 7 & 8). Includes CF-22
CF-11A
Filter disk/screen for CFPP (as per Section 6.1.8.1.c of D6371), dozen
CF-11B
Replacement “O” rings for filter screen (large), dozen for CFPP
CF-22
Brass Filter Holder with CF-11A filter screen for CFPP
DR-AP
Aspiration pipette for CFPP
CF-12A
Replacement “O” rings for pipette (small), dozen for CFPP
CF-17
Vacuum pump (as per Section 6.1.12) (115 volt) for CFPP
CF-17A
Vacuum pump (as per Section 6.1.12) (220 volt) for CFPP
Note: Vacuum pump required if suitable vacuum source unavailable. Supports up to 6 positions
DR4-TP
Spare sample temperature probe. Suitable for CFPP, pour, and/or freeze point
DR4-TP-Cloud
Spare sample temperature probe. Suitable for cloud point (spring loaded)
DR-Kit-CP
Recommended spare accessories for automatic Cloud, per position
Includes: (6) DR-CP, (1) CP-2
DR-Kit-PP
Recommended spare accessories for automatic Pour, per position
Includes: (6) DR-PP, (1) CP-2
DR-Kit-CF
Recommended spare accessories for automatic CFPP, per position
Includes: (6) DR-CF, (1) CP-2, (2) CF-11A, (1) CF-11B, (2) DR-AP, (1) CF-12A
Note: Vacuum pump, if needed, ordered separately
DR-Kit-FP
Recommended spare accessories for automatic Freeze, per position
Includes: (6) DR-FP

*For other combinations, please inquire.
Specifications subject to change without notice. Lawler Manufacturing Corporation © 2011