Biodiesel oxidation tester as per EN-14112, D6751, ISO 6886

Home
Products
- Choose
- By Method
  - ASTM
  - ISO
  - IP
  - FTM
  - DIN
  - AFNOR
  - MISC
- By Application
- Alphabetical
  - A
  - BC
  - D
  - E-G
  - H-J
  - K-O
  - P-S
  - T-Z
- Custom Designed
Contact
Search
Catalogs
Forum


		Test Methods: EN-14112, EN-15751, ASTM D6751, ISO 6886
		Oxidation stability of FAME (fatty acid methyl esters) for biodiesel and biodiesel/diesel blends


					Multiple models available to fit any budget Conforms to EN-14112 test method for B100 biodiesel Measures oxidation stability of FAME (fatty acid methyl esters) Conforms to ASTM D6751 specifications Automated operation Windows PC Data Acquisition Software Operating temperature from 40ºto 150ºC Temperature stability of ±0.1ºC


					Click for automated testing cold filter plugging point (CFPP) Click for manual testing cold filter plugging point (CFPP) Click for low temperature flow test (LTFT) Click for cloud point testing apparatus Click for kinematic viscosity baths Click for copper corrosion testing apparatus Click for additional oxidation stability test apparatus

Model 321 series of oxidation stability baths conform to the requirements of EN-14122 test method, incorporated in ASTM D6751 specifications for B100 fatty acid methyl esters (FAME) for biodiesel blending.

Models 321 series employ an aluminum block configured to fit the specified test tube holding 3.0 gm of FAME (fatty acid methyl esters). When the sample reaches test temperature of 110ºC filtered, dry air is sparged at 10 ± 1L/hr. to each test specimen.

The volatiles generated (organic acids) from this oxidation process are collected in a receiver of distilled or deionized water. The increase of acidity in the receiver is measured with time with an integral conductivity measuring device. The oxidation induction period is automatically calculated based on the break in the rate of increase (second derivative) of conductivity in the receiver.

Each position’s receiver has cap with an integral conductivity probe reporting data to the PC.

Available Models

Model No.	No. of Test Positions	Description
321-2	2	Automated FAME Oxidation Unit for EN15751. 2 test positions. Fully equipped with built-in AC-2 air compressor, desiccant, LM-PC*, operating software, aluminum heated block with 2 test positions, 2 conductivity probes & flowmeters, EN-11 and EN-12 glassware, EN-13 tubes, stoppers, tubing, and hoses
321-4	4	Automated FAME Oxidation Unit for EN15751. 4 test positions. Fully equipped with built-in AC-2 air compressor, desiccant, LM-PC*, operating software, aluminum heated block with 4 test positions, 4 conductivity probes & flowmeters, EN-11 and EN-12 glassware, EN-13 tubes, stoppers, tubing, and hoses

*Note: LM-PC Lawler supplied computer. Specify desktop PC or laptop

Accessories and Options

Part No.	Description
EN-10	Reactive vessel (test tube), ea 150 mm length. For B100 biodiesel. EN14112. (one per position)
EN-11	Reactive vessel (test tube), ea 250 mm length. For biodiesel/diesel blends. EN15751. (one per position, included)
EN-12	Measuring vessel (one per position, included)
EN-13	Air inlet tube for EN15751. Longer length to fit EN-11. (one per position, included)
EN-14	Air inlet tube for EN14112. Shorter length to fit EN-10. (one per position)
EN-15	Case of quantity (100) EN-10 Reactive Vessels. Use once and dispose.
EN-16	Case of quantity (100) EN-11 Reactive Vessels. Use once and dispose.
AC-2	Replacement Air Compressor. Method requires 10 L/hr per position

Home | Products | Contacts | Search